HP ProCurve 7102dl Reference Manual page 1142

SROS Command Line Interface Reference Guide
pppoe service-name <name>
Use the pppoe service-name command to use this tag value to filter PPPoE session offers from PPPoE
servers. Use the no form of this command to return to the default setting.
Syntax Description
<name>
Default Values
By default, no names are specified.
Usage Examples
The following example defines a service type that is not to be accepted by the SROS:
ProCurve(config)#interface ppp 1
ProCurve(config-ppp 1)#pppoe service-name Service_Name
5991-2114
Specifies a service name by text string (up to 255 characters) corresponding to
the Service-Name Tags under RFC 2516. This string indicates an ISP name (or a
class or quality of service)
© Copyright 2007 Hewlett-Packard Development Company, L.P.
PPP Interface Configuration Command Set
.
If this field is not specified, any service is acceptable.
1140