Ca Profile Configuration Command Set - HP ProCurve 7102dl Reference Manual

SROS Command Line Interface Reference Guide
CA P C
ROFILE
To activate the Certificate Authority (CA) Profile Configuration mode, enter the crypto ca profile
command at the Global Configuration mode prompt. For example:
ProCurve>enable
ProCurve#configure terminal
ProCurve(config)#crypto ca profile MyProfile
Configuring New CA Profile MyProfile
ProCurve(ca-profile)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
bind <#> <from interface> <slot/port> <tdm-group#> <to interface> <slot/port>
do on page 1435
end on page 1436
exit on page 1437
ping <address> on page 1438
All other commands for this command set are described in this section in alphabetical order.
crl optional on page 1213
email address <email address>
enrollment retry [count | period]
enrollment terminal
enrollment url <url>
fqdn <fqdn> on page 1218
ip-address <address>
password <password>
serial-number on page 1221
subject-name <name>
5991-2114
ONFIGURATION
on page 1214
on page 1215
on page 1216
on page 1217
on page 1219
on page 1220
on page 1222
© Copyright 2006 Hewlett-Packard Development Company, L.P.

CA Profile Configuration Command Set

C S
OMMAND ET
on page 1431
1212