HP ProCurve 7102dl Reference Manual page 1163

SROS Command Line Interface Reference Guide
backup schedule [day | enable-time | disable-time]
Use the backup schedule command to set the time of day that backup will be enabled. Use this command
if backup is desired only during normal business hours and on specific days of the week. Use the no form
of this command to disable backup (as specified). For more detailed information on tunnel backup
functionality, refer to the Functional Notes section of the command backup call-mode <role> on page
1150.
Syntax Description
day
enable-time
disable-time
Default Values
By default, backup is enabled for all days and times if the backup auto-backup command has been
issued and the backup schedule has not been entered.
Usage Examples
The following example enables backup Monday through Friday 8:00 am to 7:00 pm:
ProCurve(config)#interface tunnel 1
ProCurve(config-tunnel 1)#backup schedule enable-time 08:00
ProCurve(config-tunnel 1)#backup schedule disable-time 19:00
ProCurve(config-tunnel 1)#no backup schedule day Saturday
ProCurve(config-tunnel 1)#no backup schedule day Sunday
5991-2114
Sets the days to allow backup (valid range: Monday through Sunday).
Sets the time of day to enable backup. Time is entered in 24-hour format (00:00).
Sets the time of day to disable backup.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Tunnel Configuration Command Set
1161