HP ProCurve 7102dl Reference Manual page 1211

SROS Command Line Interface Reference Guide
max-channels <1-255>
Use the max-channels command to specify the maximum number of channels allocated for the ISDN
group. Use the no form of this command to return to the default value.
Syntax Description
<1-255>
Default Values
By default, the maximum number of channels is set to 0. When max-channels is set to 0, the group does
not limit the number of usable channels and can use all available channels. Use the no max-channels
command to return to the default value.
Usage Examples
The following example sets the maximum number of channels for ISDN group 1 to 5:
ProCurve(config)#isdn-group 1
ProCurve(config-isdn-group 1)#max-channels 5
5991-2114
Specifies the maximum number of channels allocated for the ISDN group. Valid
range is from 1 to 255.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
ISDN Group Config Command Set
1209