Diagnosis And Prescription For Each Error Code; Check Item - Toshiba e-STUDIO206L Service Manual

8.3

Diagnosis and Prescription for Each Error Code

8.3.1

Check item

Check item
Sensor check
Connector check
Harness check
Motor check
Board check
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
ERROR CODE AND TROUBLESHOOTING
Contents
• Check the sensor in the test mode.
• Check that there is no dust on the sensor.
• Check that the actuator is correctly operated.
• Check that the connector is not disconnected.
• Check that the pins are not deformed and do not come off.
• Disconnect and reconnect the connector.
• Check if the harnesses are open circuited.
• Check the motor in the test mode.
• Check that there is no abnormality in the driving section.
• Check that there is no abnormality in the roller.
• Check if the board is short circuited or open circuited.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 44