Toshiba e-STUDIO206L Service Manual page 404

<Procedure>
(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Key in a code and press the [START] button.
(3) Key in an adjustment value.
(To correct the keyed-in value, press the [CLEAR] button.)
Press the [OK] or [INTERRUPT] button to store the value.  The equipment goes back to the
(4)
ready state.
(5) Press the [FAX] button and then the [START] button. Then perform test copying.
(6) If the desired image density has not been attained, repeat step (1) to (5).
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
SETTING / ADJUSTMENT
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
6 - 24