Precautions When Writing The Engine Rom Data; Engine Rom - Toshiba e-STUDIO206L Service Manual

[B] Precautions when writing the Engine ROM data
• Clear the buffer of the ROM writer by means of the following settings.
From Address
0
800000
• Set the writing voltage (VID) to 3.3 V.
When an error appears while the data are being written to the download jig, set the writing voltage
(VID) to 12 V and then write them.
• When writing the data, set the address from 0 to 3FFFFF. The data may not be written correctly if it
is not set.
• Load the data file into the buffer by means of the following settings.
Auto Format Detected
From File
To Buffer
From File Address
To Buffer Address
Buffer Size
Clear Buffer Before Loading the file
[B-1]

Engine ROM

Rotary Switch
1
2
Notes:
Be sure not to confuse different ROM Versions since the file name is identical although the ROM
version is different.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
FIRMWARE UPDATING
To Address
800000
8000FF
Binary
Normal
Normal
0
300000
800000
Clear buffer with blank state
File Name
T160MWW.xxx
T165MWW.xxx
TH330MWW.xxx
N/A
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
11 - 38
Code
FF
00
Flash ROM Remarks
ROM1 e-STUDIO206L/256/
306/356/456/506
ROM1 e-STUDIO207L/257/
307/357/457/507
ROM2