4.16.3
KD-1026 (Large Capacity Feeder (LCF))
(1)
Turn the power OFF and unplug the power
cable.
(2)
Remove 1 screw and take off the connector
cover.
(3)
Remove 1 screw and the ground wire, and
then disconnect 2 connectors.
(4)
Remove 1 screw and then take off the
stopper from the lower drawer of the
equipment.
(5)
Take off the lower drawer of the equipment.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Connector cover
Fig. 4-419
Fig. 4-420
Drawer
Fig. 4-421
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 147
Stopper
DISASSEMBLY AND REPLACEMENT
4