E-Studio207L/257/307/357/457/507 - Toshiba e-STUDIO206L Service Manual

11.2.2

e-STUDIO207L/257/307/357/457/507

To update firmware, store update programs and firmware data files in the USB media.
The update program is "signature.XX.sig", and it needs to be stored in the USB device. It is necessary
for updating firmware except that of the System firmware.
For the data file for each firmware, refer to the following tables.
Notes:
When performing the update, use the latest program.
Firmware type and data file name for updating
Equipment
Firmware
Master data
(HDD program data)
System ROM
(OS data)
Engine ROM
(Engine firmware)
Scanner ROM
(Scanner firmware)
RADF ROM
(RADF firmware)
Finisher firmware
(MJ-1107)
Finisher firmware
(MJ-1108)
Saddle stitcher
firmware
(MJ-1108)
Hole punch unit
firmware
(MJ-6104)
Store the data file for updating in the model specific folder.
Model specific folder name
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Stored
Hard disk T330HD0Wxxxx.tar
* xxxx is version.
System control PC T330SF0Wxxxx.tar
board * xxxx is version.
(SYS board)
Logic PC board TH330MWW.xxx
(LGC board) * e-STUDIO207L/257/
* xxx is version.
TH335MWW.xxx
* e-STUDIO507
* xxx is version.
System control PC TH330SLGWW.xxx
board * xxx is version.
(SYS board)
DLG board H614DFWW.xxx
(MR-3028) * xxxx is version.
Finisher control PC FIN1107T.xxx
board * xxxx is version.
Finisher control PC FIN1108T.xxx
board * xxxx is version.
Saddle stitcher PC SDL1108T.xxx
board * xxxx is version.
Punch control PC PUN6104T.xxx
board * xxxx is version.
207_307
11 - 13
Data file name
SYSTEM
FIRMWARE(HD Data)
SYSTEM
FIRMWARE(OS Data)
ENGINE FIRMWARE
307/357/457
SCANNER FIRMWARE
RADF FIRMWARE
FINISHER FIRMWARE
FINISHER FIRMWARE
SADDLE FIRMWARE
PUNCH FIRMWARE
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
Display
FIRMWARE UPDATING
11