Bypass Feed Unit - Toshiba e-STUDIO206L Service Manual

(4) Disconnect 1 connector and then take off the
paper width detection PC board.
4.9.12

Bypass feed unit

(1) Take off the automatic duplexing unit.
 P. 4-134 "4.15.1 Automatic Duplexing
Unit (ADU)"
(2) Release 2 latches and then take off the
spring holder.
(3) Disconnect 1 connector and remove 2
screws. Then take off the bypass feed unit.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Paper size detection board
Fig. 4-199
Fig. 4-200
Fig. 4-201
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 71
Spring holder
Bypass feed unit
DISASSEMBLY AND REPLACEMENT
4