Process Unit Fan (M2) <E-Studio207L/257/307/357/457/507> - Toshiba e-STUDIO206L Service Manual

4.10.5 Process unit fan (M2) <e-STUDIO207L/257/307/357/457/507>
(1) Take off the inner tray.
 P. 4-13 "4.2.10 Inner tray"
(2) Disconnect 1 connector [1] of the process
unit fan. Take off the process unit fan [2]
toward the upper side.
Notes:
When installing the process unit fan [2],
make sure that its harness is placed as
shown in the photo [3] (rear lower side).
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-247
Fig. 4-248
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 87
DISASSEMBLY AND REPLACEMENT
4