Main Charger Grid; Main Charger Cleaner; Needle Electrode - Toshiba e-STUDIO206L Service Manual

4.11.5

Main charger grid

(1) Take off the main charger
( P. 4-91 "4.11.4 Main charger").
(2) Remove the spring and take off the main
charger grid.
Notes:
Do not touch the mesh area of the grid.
4.11.6

Main charger cleaner

(1) Take off the main charger
( P. 4-91 "4.11.4 Main charger").
(2) Release the hook of the cleaning shaft. Then
rotate the shaft at 90 degrees to take it off.
4.11.7

Needle electrode

(1) Take off the main charger grid and main
charger cleaner.
 P. 4-92 "4.11.5 Main charger grid"
 P. 4-92 "4.11.6 Main charger cleaner"
(2) Take off the terminal covers of both front and
rear sides.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Main charger grid
Fig. 4-260
Main charger cleaner
Fig. 4-261
Fig. 4-262
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 92
Spring
Terminal cover