Drawer Feed Clutch (Clt4/Clt5) - Toshiba e-STUDIO206L Service Manual

4.9.9

Drawer feed clutch (CLT4/CLT5)

(1) Take off the drawer feeding unit
( P. 4-63 "4.9.2 Drawer feeding unit").
(2) Remove 2 screws and take off the clutch
plate.
(3) Disconnect 1 connector and take off the
upper/lower drawer feed clutch and bushing.
Notes:
Match the rotation stopper of the clutch with
the position shown in the figure for
assembling.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Clutch plate
Fig. 4-191
Drawer feed clutch
Fig. 4-192
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 68
Bushing