Mj-1101/1107 (Finisher) - Toshiba e-STUDIO206L Service Manual

4.16.6

MJ-1101/1107 (Finisher)

(1) Turn the power OFF and unplug the power
cable.
(2) Take off the connector cover and disconnect
the connector.
(3) Open the front cover of the finisher.
(4) Remove 1 screw and take off the bracket.
(5) Pull out the fixing lever of the finisher. Then
take off the Finisher.
Notes:
Be careful not to fell the finisher when
moving the finisher unit only.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Connector cover
Connector
Fig. 4-442
Fig. 4-443
Fig. 4-444
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 155
Bracket
Lever
DISASSEMBLY AND REPLACEMENT
4