High-Voltage Transformer - Toshiba e-STUDIO206L Service Manual

(4) Disconnect 10 connectors, remove 9 screws,
and then take off the Switching regulator.
Notes:
Be careful not to touch the area covered with
a Mylar since electrical charge may remain.
9.2.8

High-voltage transformer

(1) Take off the laser optical unit.
( P. 4-60 "4.8.1 Laser optical unit").
(2) Take off the left cover
( P. 4-13 "4.2.11 Left cover").
(3) Disconnect 2 connectors [1], remove 2
screws and then take off the duct [2]
(4) Remove the high-voltage transformer.
• e-STUDIO207L/257/307: Disconnect 6
terminals and one connector, remove 2
screws, and then take off the High-
voltage transformer together with its
bracket.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Except for NAD, MJD
Fig. 9-35
[1]
[2]
Fig. 9-36
Fig. 9-37
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
9 - 13
Switching regulator
High-voltage transformer
REPLACEMENT OF HDD/PC BOARDS
9