Sram Board - Toshiba e-STUDIO206L Service Manual

• e-STUDIO357/457/507: Disconnect 6
terminals and 2 connectors, remove 2
screws, and then take off the High-
voltage transformer together with its
bracket.
(5) Remove 5 screws and then take off the
bracket from the High-voltage transformer.
9.2.9

SRAM board

(1) Take off the rear cover
( P. 4-12 "4.2.6 Rear cover").
(2) Release 2 latches [1] and take off the SRAM
board for the SYS board with the case.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
REPLACEMENT OF HDD/PC BOARDS
High-voltage transformer
Bracket
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
9 - 14
High-voltage transformer
Fig. 9-38
Bracket
Fig. 9-39
Fig. 9-40