[2D15] Exceeding The Maximum Size For File Sharing; [2D22] Job Control Module Access Abnormality; [2D60] File Library Access Abnormality; [2D30] Directory Creation Failure - Toshiba e-STUDIO206L Service Manual

[2D15] Exceeding the maximum size for file sharing

Classification
File sharing related error
Check item
Setting
[2D20] System management module access abnormality
[2D21] Job control module access abnormality

[2D22] Job control module access abnormality

[2D60] File library access abnormality

Classification
File sharing related error
Check item
Setting

[2D30] Directory creation failure

[2D31] File creation failure
[2D33] File access failure
Classification
File sharing related error
Check item
Setting
[2D40] Image conversion abnormality
Classification
File sharing related error
Check item
Setting
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Exceeding the maximum size for file sharing
• Divide the file in error into several files and retry. Or retry
the job in a single-page format.
System management module access abnormality
Job control module access abnormality
File library access abnormality
• Turn the power OFF and then back ON. Perform the job in
error again.
Check if there are no other running jobs and perform the
HDD formatting ([5] + [C] + [POWER] -> 3 -> 1). If the
recovery is still not completed, replace the SYS board.
Directory creation failure
File creation failure
File access failure
• Check if the access privilege to the storage directory is
writable.
• Check if the server or local disk has a sufficient space in
disk capacity.
Image conversion abnormality
• Turn the power OFF and then back ON. Perform the job in
error again.
• Replace the main memory and perform the job again.
• If the error still occurs, check that there is no job, and
initialize the shared folder with [5] + [C] + [START].
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
8 - 239
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures
ERROR CODE AND TROUBLESHOOTING
8