(6)
Disconnect 1 connector, and then take off the
control panel unit [3].
4.3.3
Display board (DSP)
(1)
Take off the control panel unit.
P. 4-18 "4.3.2 Control panel unit"
(2)
Remove 9 screws and take off the hinge
bracket [1].
(3)
Disconnect 5 connectors.
(4)
Remove 2 screws and take off the display
board [2].
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 20
[ 3 ]
Fig. 4-57
[ 1 ]
Fig. 4-58
[ 2 ]
Fig. 4-59