Toshiba e-STUDIO206L Service Manual page 878

(3) Remove 5 screws, disconnect 2 connectors,
and then take off the HDD.
(4) Remove 4 screws and then remove 2
brackets and the ground wire from the HDD.
[B] Normal hard disk (ADI-HDD)
(1) Take off the SYS board.
( P. 9-1 "9.1.1 System control PC board
(SYS board)").
(2) Remove 2 screws, and then take off the
protection film [1].
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
REPLACEMENT OF HDD/PC BOARDS
HDD
Bracket
Ground wire
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
9 - 2
Fig. 9-3
Bracket
Fig. 9-4
[1]
Fig. 9-5