4.5.7
Carriage-1
(1)
Take off the original glass.
P. 4-26 "4.5.1 Original glass"
(2)
Take off the upper rear cover.
P. 4-4 "4.1.7 Upper rear cover"
(3)
Take off the front upper cover.
P. 4-1 "4.1.2 Front upper cover"
(4)
Release the harness from 1 harness clamp.
(5)
Release the harness from the harness guide.
(6)
Rotate the drive pulley and move the
carriage-1 so that the screw can be seen.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Fig. 4-105
Fig. 4-106
Fig. 4-107
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 36