Diagnosis And Prescription For Each Error Code - Toshiba e-STUDIO2006 Service Manual

8.3

Diagnosis and Prescription for Each Error Code

8.3.1 Check item
Check item
Sensor check
Connector check
Harness check
Motor check
Board check
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
Contents
• Check the sensor in the test mode.
• Check that there is no dust on the sensor.
• Check that the actuator is correctly operated.
• Check that the connector is not disconnected.
• Check that the pins are not deformed and do not come off.
• Disconnect and reconnect the connector.
• Check if the harnesses are open circuited.
• Check the motor in the test mode.
• Check that there is no abnormality in the driving section.
• Check that there is no abnormality in the roller.
• Check if the board is short circuited or open circuited.
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
8 - 15
ERROR CODE AND TROUBLESHOOTING
8