Kn-2520 (Bridge Unit) - Toshiba e-STUDIO206L Service Manual

4.16.8

KN-2520 (Bridge unit)

(1) Turn the power OFF and unplug the power
cable.
(2) Pull out the finisher from the equipment.
(3) Take off the right rear cover-1 and the right
rear cover-2.
 P. 4-6 "4.1.13 Right rear cover-1 / Right
rear cover-2"
(4) Disconnect 1 connector.
(5) Remove 1 screw and take off the cover.
(6) Remove 1 screw.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 158
Connector
Fig. 4-451
Cover
Fig. 4-452
Fig. 4-453