[ 5 ] E-mail related error
[2C10] System access abnormality
[2C32] File deletion failure
Classification
E-mail related error
Check item
Setting
[2C11] Insufficient memory
Classification
E-mail related error
Check item
Setting
[2C12] Message reception error
[2C13] Message transmission error
Classification
E-mail related error
Check item
Setting
[2C14] Invalid parameter
Classification
E-mail related error
Check item
Setting
[2C15] Exceeding file capacity
Classification
E-mail related error
Check item
Setting
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
ERROR CODE AND TROUBLESHOOTING
•
Turn the power OFF and then back ON. Perform the job in
error again.
•
If the error still occurs, check that there is no job, and
format the HDD with [5] + [C] + [START].
•
When there are running jobs, perform the job in error
again after the completion of the running jobs.
•
If the error still occurs, turn the power OFF and then back
ON, and perform the job again.
•
Turn the power OFF and then back ON. Perform the job in
error again.
•
When a template is used, form the template again.
•
If the error still occurs, turn the power OFF and then back
ON, and perform the job again.
•
Reset and extend the "Maximum send to E-mail/iFAX size"
or reduce the number of pages and perform the job again.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 232
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures