Service Technician Reference; Print Count (Number Of Output Pages) - Toshiba e-STUDIO206L Service Manual

Multifunctional digital systems
Hide thumbs Also See for e-STUDIO206L:
Table of Contents

Advertisement

Service technician reference

This is a system that accumulates data between clearing the counter of the service technician
reference by service technician and subsequently clearing the same counter.
Clearing of the counter of the service technician reference is performed in the setting mode (08-
6502).
-

Print count (number of output pages)

The number of output pages shown at the pixel counter is counted after converting all paper
sizes to the standard paper size (A4/LT). Printing on other than the standard size is converted by
paper area ratio. The standard paper size is set in the setting mode (08-6500).
The examples of conversion are as follows:
Ex.)
"1" is added to the print count when printing on A4/LT size.
"2" is added to the print count when printing on A3/LD size. (area ratio to A4/LT: 200%)
"1.49" is added to the print count when printing on B4 size. (area ratio to A4: 149%)
"1.27" is added to the print count when printing on LG size. (area ratio to LT: 127%)
-
Pixel count (%)
Pixel count (%) shows the ratio of laser emitting pixels to all pixels on standard paper.
The examples of pixel count are as follows:
Notes:
In the following examples, 'solid copy' is considered to be 100%. But since the image has 4
margins, it never becomes 100% actually.
Ex.)
Printing 5 pages on A4/LT size with solid copy (Laser emits to all pixels.)
 Pixel count: 100%, Print count: 5
Printing 5 pages on A4/LT size with blank copy (Laser never emits.)
 Pixel count: 0%, Print count: 5
Printing 2 pages on A4/LT size with solid copy (Laser emits to all pixels.)
Printing 2 pages on A4/LT size with blank copy (Laser never emits.)
 Pixel count: 50%, Print count: 4
Printing 3 pages on A4/LT size with 6% of laser emission
Printing 1 page on A4/LT size with 2% of laser emission
 Pixel count: 5%, Print count: 4
Printing 2 pages on A3/LD size with solid copy (Laser emits to all pixels.)
 Pixel count: 100%, Print count: 4
Printing 2 pages on A3/LD size with 6% of laser emission
 Pixel count: 6%, Print count: 4
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
5 - 41
SELF-DIAGNOSIS MODES
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents