[ 2 ] RFC related error
[2500] HOST NAME error (RFC: 500) / Destination mail address error (RFC: 500) / Terminal mail
address error (RFC: 500)
[2501] HOST NAME error (RFC: 501) / Destination mail address error (RFC: 501) / Terminal mail
address error (RFC: 501)
Classification
RFC related error
Check item
Setting
[2503] Destination mail address error (RFC: 503)
[2504] HOST NAME error (RFC: 504)
[2551] Destination mail address error (RFC: 551)
Classification
RFC related error
Check item
Setting
Replace parts
SYS board
[2550] Destination mail address error (RFC: 550)
Classification
RFC related error
Check item
Setting
[2552] Terminal/Destination mail address error (RFC: 552)
Classification
RFC related error
Check item
Setting
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
•
Check if the Terminal mail address and Destination mail
address are correct.
•
Check if the mail server is operating properly.
•
Turn the power OFF and then back ON. Perform the job in
error again.
•
Check if the mail server is operating properly.
•
Turn the power OFF and then back ON. Perform the job in
error again.
•
If the error still occurs, replace the SYS board.
•
Check the state of the mail box in the mail server.
•
Confirm the size on the mail server.
•
Transmit again in text mode or with lower resolution or
divide the document and transmit again.
•
If the error still occurs, turn the power OFF and then back
ON. Perform the job in error again.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
8 - 225
Error item
Measures
Error item
Measures
Remarks
Error item
Measures
Error item
Measures
ERROR CODE AND TROUBLESHOOTING
8