1St Transport Sensor (S21)) - Toshiba e-STUDIO206L Service Manual

4.9.18

1st transport sensor (S21))

(1) Take off the registration guide.
( P. 4-74 "4.9.16 Registration guide").
(2) Take off the actuator.
(3) Release 3 latches and then take off the 1st
transport sensor.
4.9.19 Feed cover
(1) Open the feed cover and then pull out the
locking pin.
(2) Take off the feed cover by sliding it.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
1st transport sensor
Fig. 4-211
Fig. 4-212
Fig. 4-213
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 75
Actuator
Locking pin
Feed cover
DISASSEMBLY AND REPLACEMENT
4