Dsp Board - Toshiba e-STUDIO206L Service Manual

4.4.3

DSP board

(1) Remove the control panel unit.
 P. 4-22 "4.4.1 Control panel unit"
(2) Remove 8 screws and take off the cover [1].
(3) Remove 4 screws and disconnect 1 flat
cable, and then take off the bracket [1].
(4) Remove 3 conductive sheets [1], disconnect
the 2 connectors [2], and take off 1 flat cable.
(5) Remove the DSP board [3].
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 24
Fig. 4-69
Fig. 4-70
Fig. 4-71