Toshiba e-STUDIO206L Service Manual page 370

• (05) adjustment value/(08) setting value difference list
05 DIFFERENCE LIST
xx-xx-xx xx:xx
CODE
* 2400
The function in which the 05/08 setting value differences between the factory default and the current
value can be printed or output with a CSV file.
The list of differences between the current and the backed-up values of the (05) adjustment and the
(08) setting values is output. "*" is marked on the left side of the code if there is a difference, and "+"
is marked on the left side of the code if there is no backed-up value.
Notes:
• Back-up data of the factory default are automatically created when the automatic gamma
adjustment of the easy set-up mode has been completed during the unpacking and setting up
of the equipment. The back-up file is retained even if the firmware is upgraded. However, the
file is deleted when 3C-3 (Format HDD) is performed or HDD/SSD is replaced.
• A back-up file does not exist for equipment to which the easy set-up mode has been
performed before this function is applied.
• When the easy set-up mode is restarted while a specified value such as 3 is set for 08-9022
(Production process management status for easy setup), the back-up file stored during
unpacking and setting up after the completion of the automatic gamma adjustment is deleted,
and another file as of then is newly created.
• When no back-up file exists:
- When 9S-121 (122) is performed, the equipment returns to the ready state of the 9S mode
without performing printing.
- When 9S-221 (222) is performed, the equipment returns to the ready state of the 9S mode
and the error message "The file cannot be saved." appears on the panel.
• When you want to create a back-up file if one does not exist:
A back-up file can be automatically created after the completion of the automatic gamma
adjustment when the easy set-up mode is restarted while a specified value such as 3 is set for
08-9022 (Production process management status for easy setup).
In this case, the current values are stored in the file, but not the ones for unpacking and
setting up.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
SELF-DIAGNOSIS MODES
BACKUP CURRENT
128 160
Fig.5-33
5 - 38
S/N: xxxxxxxxx TOTAL:
DF TOTAL:
TOSHIBA e-STUDIOxxxx
CODE
BACKUP CURRENT
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
9999999
9999999