Installing The Lamp Harness - Toshiba e-STUDIO206L Service Manual

(5) Remove 3 screws and take off the lamp
inverter board.
4.5.9

Installing the lamp harness

(1) Install the harness to 2 harness clamps and
wire it under carriage-2.
(2) Rotate the drive pulley and move the
carriage-1 to the left side.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Lamp inverter board
Fig. 4-117
Fig. 4-118
Fig. 4-119
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 40