4.1.10
Left cover
(1)
Remove 2 tap-tight screws and 5 screws.
Then take off the left cover.
4.1.11
Tray back cover
(1)
Take off the left rear cover
( P. 4-4 "4.1.8 Left rear cover").
(2)
Take off the inner tray
( P. 4-4 "4.1.9 Inner tray").
(3)
Take off the tray back cover.
4.1.12
Connecting port cover
(1)
Open the automatic duplexing unit.
(2)
Remove 1 screw and then take off the
connecting port cover by releasing 2 hooks.
Remarks:
When installing the connecting port cover,
hang the 2 hooks of the connecting port
cover on the frame of the equipment, and
then fix it with 1 screw.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Left cover
Fig. 4-13
Tray back cover
Fig. 4-14
Connecting port cover
Fig. 4-15
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 5
DISASSEMBLY AND REPLACEMENT
4