Incorrect Paper Size Setting For Upper Drawer; Incorrect Paper Size Setting For Lower Drawer; Incorrect Paper Size Setting For Pfp Upper Drawer; Incorrect Paper Size Setting For Pfp Lower Drawer - Toshiba e-STUDIO206L Service Manual

Multifunctional digital systems
Hide thumbs Also See for e-STUDIO206L:
Table of Contents

Advertisement

[E061] Incorrect paper size setting for upper drawer
[E062] Incorrect paper size setting for lower drawer
[E063] Incorrect paper size setting for PFP upper drawer
[E064] Incorrect paper size setting for PFP lower drawer
[E065] Incorrect paper size setting for bypass tray
Classification
Other jam
Check item
Paper size
[E550] Paper remaining on the transport path
Classification
Other jam
Proce
Check item
dure
1
Open the cover of the unit/
area whose picture is
blinking on the control
panel. Is there any paper
on the transport path?
2
Is the sensor in the
jamming area working?
(Perform the input check
in the test mode: refer to
the following table)
3
LGC board
Parts to be replaced
Sensor
LGC board
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
ERROR CODE AND TROUBLESHOOTING
The size of paper in the 1st drawer differs from size setting of the
equipment.
If any paper remains in the equipment or drawer, remove it. Match
the paper size of the drawer setting and the one in the drawer.
* Paper size detection is performed at the first sheet of paper
when the drawer is opened or closed, or when the power of the
equipment is turned ON.
Paper remaining jam on the transport path
Result
Yes
Remove the paper.
No
Yes
No
Check if the connector of the sensor is
disconnected.
Check if any of the connectors on the LGC
board is disconnected.
Check if the connector pins are
disconnected and the harnesses are open
circuited.
Check if the conductor pattern on the LGC
board is short circuited or open circuited.
Replace the sensor.
Replace the LGC board.
Replace the LGC board.
Refer to the following table
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 76
Error content
Measures
Error content
Measure
Remark
Next
Step
2
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents