Toshiba e-STUDIO206L Service Manual page 912

[M] Adjust image quality
(1) Start up with the Adjustment mode (05).
(2) Perform "Data transfer of characteristic value of scanner" (05-3203).
(3) Perform "Automatic gamma adjustment" <PPC> (05-7165).
 P. 6-22 "6.4.1 Automatic gamma adjustment"
(4) Turn the power OFF.
[N] Initialize settings when FAX Unit (GD-1250 / GD-1350) is installed
(1) Connect the connector of the FAX unit (GD-1250 / GD-1350).
(2) Start up with the Setting mode (08).
(3) Set the destination of FAX (08-9001).
(4) Turn the power OFF.
(5) Start up with the FAX Clearing Mode (1*).
(6) Perform the FAX Set Up (1*-100).
(7) Turn the power OFF and then back ON.
(8) Set the dial type according to these buttons: [USER FUNCTIONS] -> [ADMIN] -> [FAX] ->
[INITIAL SETUP]
[O] Set date and time
Set the date and time according to these buttons.
[USER FUNCTIONS]  [ADMIN]  [GENERAL]  [CLOCK]  [DATE/TIME]
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
REPLACEMENT OF HDD/PC BOARDS
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
9 - 36