Lens Unit - Toshiba e-STUDIO206L Service Manual

(4) Remove 1 screw. Lift up the front side of the
exposure lamp [1] and take off by sliding it.
(5) Disconnect the harness.
Notes:
When installing the harness, be careful not to
insert it at an angle.
4.5.5

Lens unit

[A] 4-line CCD
(1) Remove the lens cover.
 P. 4-26 "4.5.2 Lens cover"
(2) Remove 1 screw and take off the APS
sensor.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-90
Fig. 4-91
Fig. 4-92
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 31
[1]
DISASSEMBLY AND REPLACEMENT
4