Firmware Updating With Pwa-Dwnld-350-Jig1 - Toshiba e-STUDIO206L Service Manual

11.4 Firmware Updating with PWA-DWNLD-350-JIG1

The data to be overwritten by this update are as follows.
Update the ROM data written on each board according to the need such as the case of replacing the
system control PC board, logic PC board or scanning section control PC board.
Equipment
Firmware
System ROM
(OS data)
Engine ROM
(Main firmware)
PWA-DWNLD-350-JIG1 (16MB)
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
FIRMWARE UPDATING
Stored
System control PC board
(SYS board)
Logic PC board
(LGC board)
[1]
Fig.11-25 Jig board: PWA-DWNLD-350-JIG1 (16MB)
[1] Connector (for SYS board connection)
[2] Connector (for ROM writer adapter connection)
11 - 34
e-STUDIO206L/256/ e-STUDIO207L/257/
306/356/456/506 307/357/457/507
Yes
Yes
[2]
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Yes
Yes