Toshiba e-STUDIO206L Service Manual page 247

(14) Remove 1 E-ring, 1 pin and 1 pulley.
(15) Take off the guide roller on the rear side.
(16) Remove the seal on the front side. Remove 1
E-ring and 1 bushing.
(17) Take off the developer sleeve.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Guide roller
Pulley
Pin
Fig. 4-306
Seal
E-ring
Fig. 4-307
Developer sleeve
Fig. 4-308
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 107
Bushing
DISASSEMBLY AND REPLACEMENT
4