Toshiba e-STUDIO206L Service Manual page 308

(9) Rotate the pulley to move the carriage to the
paper exit side.
(10) Install the Scanner Damp Heater (Left) with 2
screws.
(11) Install the Scanner Damp Heater (Left) in the
cutout of the frame in the equipment as
shown in the right-hand figure.
Fix the Scanner Damp Heater (Left) with 1
screw and then insert 1 connectors.
Notes:
Check that no harnesses will be caught by
moving the carriage.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Carriage
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 168
Fig. 4-480
Scanner Damp
Heater (Left)
Fig. 4-481
Fig. 4-482