Sram Board - Toshiba e-STUDIO206L Service Manual

(5) Remove 5 screws and then take off the
bracket from the High-voltage transformer.
9.1.9

SRAM board

(1) Take off the rear cover
( P. 4-3 "4.1.6 Rear cover").
(2) Release 2 latches and take off the SRAM
board for the SYS board with the case.
(3) Release 2 latches and take off the SRAM
board for SYS board from the case.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
High-voltage transformer
Bracket
Fig. 9-18
Latch
Latch
Case
Fig. 9-19
Latch
Fig. 9-20
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
REPLACEMENT OF HDD/PC BOARDS
9 - 7
Bracket
SRAM board
Case
9