Reverse Unit - Toshiba e-STUDIO206L Service Manual

4.14 PAPER EXIT SECTION/REVERSE SECTION
4.14.1 Reverse unit (only installed for e-STUDIO356/456/506 / 357/457/
507)
(1) Take off the fuser unit.
( P. 4-111 "4.13.1 Fuser unit")
Notes:
Be careful when handling the fuser unit as it
may become very hot.
(2) Remove 3 screws from the left side of the
reverse section, and then take off the cover.
(3) Take off the connecting port cover.
( P. 4-5 "4.1.12 Connecting port cover")
(4) Release the latches and take off the inner
cover.
(5) Disconnect 1 connector and remove 1 screw,
and take off the switch unit.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Cover
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 124
Reverse section
Fig. 4-353
Inner cover
latches
Fig. 4-354
Connector
Switch unit
Fig. 4-355