Toshiba e-STUDIO206L Service Manual page 193

(6) Rotate carriage-1 [1] in the direction shown
in the figure, while trying not to touch the
mirror. Then remove carriage-1 [1].
Notes:
Follow the procedure below to connect the
exposure lamp harness.
1. Push carriage-1 and -2 to the leftmost
side and fix carriage-1.
2. Securely install the exposure lamp
harness on the cable guide and SYS
board.
3. After connecting the exposure lamp
harness, move carriage-1 to the leftmost
side and check the lamp harness for any
twists.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-151
Fig. 4-152
Fig. 4-153
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 53
DISASSEMBLY AND REPLACEMENT
4