8.3.7
RADF jam
[E712] Jam not reaching the original registration sensor
Classification
RADF jam
Check item
Pickup roller
Feed roller
Separation roller
Original registration sensor
RADF board
Parts to be replaced
Original registration sensor
RADF board
Pickup roller
Feed roller
Separation roller
[E714] Feed signal reception jam
Classification
RADF jam
Check item
Empty sensor
Parts to be replaced
Empty sensor
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
ERROR CODE AND TROUBLESHOOTING
Error content
Jam not reaching the original registration sensor
Measures
Clean them if there are stained.
•
Sensor check (Perform the input check: 03-[FAX] ON[7]/[H])
•
Connector check (CN74)
•
Harness check
•
Board check
•
Connector check (CN74)
•
Harness check
Remark
Replace it if it is worn out
Replace it if it is worn out.
Replace it if it is worn out.
Error content
Feed signal reception jam
Measures
•
Sensor check (Perform the input check: 03-[FAX] ON[7]/[B])
•
Lever check
•
Connector check (CN75)
•
Harness check
Remark
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 80