Toshiba e-STUDIO206L Service Manual page 309

(12) Attach the harness to 1 connector and then
install the clamp in the equipment.
(13) Fix the harness with 2 clamps.
(14) Install the original glass.
Notes:
When installing, fit 2 small protrusions of the
original glass in the groove of the equipment
and fix the original glass with the fixing
bracket by pushing it to the left rear direction.
(15) Install the fixing bracket with 2 screws.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
1
Fig. 4-483
Fig. 4-484
Fixing bracket
Fig. 4-485
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 169
2
Original glass
DISASSEMBLY AND REPLACEMENT
4