[Cf10] Communication Module Sram Reading Failure - Toshiba e-STUDIO206L Service Manual

Replacement part
Finisher control PC board

[CF10] Communication module SRAM reading failure

Classification
Finisher related service call
MJ-1101/1107
Check Item
Main power switch
Setting of the equipment
Converter PC board
Finisher control PC board
Replacement part
Converter PC board
Finisher control PC board
MJ-1101 (When MJ-6103 is installed) / MJ-1107 (When MJ-6104 is installed)
Check Item
Main power switch
Setting of the equipment
Converter PC board
Finisher control PC board
Hole punch control PC board
Replacement part
Converter PC board
Finisher control PC board
Hole punch control PC board
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
ERROR CODE AND TROUBLESHOOTING
Communication module SRAM reading failure.
Turn OFF the main power switch, then back ON.
Check if the MJ-1101/1107 is set as the specified finisher on the
equipment. (08-4548)
• Check the connectors and harnesses between the converter
PC board and the finisher controller PC board.
• Board check
Board check
Turn OFF the main power switch, then back ON.
Check if the MJ-1101/1107 is set as the specified finisher on the
equipment. (08-4548)
• Check the connectors and harnesses between the converter
PC board and the finisher controller PC board.
• Board check
• Check the connectors and harnesses between the hole
punch control PC board and the finisher control PC board.
• Board check
Board check
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 190
Measure
Contents
Measure
Measure
Measure
Measure