Registration Roller (Metal) - Toshiba e-STUDIO206L Service Manual

(4) Take off 2 guide rollers. Then remove 1 E-
ring and 1 gear.
4.9.32

Registration roller (metal)

(1) Take off the process unit
 P. 4-88 "4.11.1 Process unit"
(2) Take off the automatic duplexing unit.
 P. 4-134 "4.15.1 Automatic Duplexing
Unit (ADU)"
(3) Take off the registration roller clutch.
 P. 4-78 "4.9.25 Registration roller clutch
(CLT2)"
(4) Remove 1 clip on the rear side.
(5) Take off the registration roller (metal) by
sliding it to the rear side and pulling it out
toward you.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
DISASSEMBLY AND REPLACEMENT
Pin
E-ring
Gear
Washer
Fig. 4-238
Fig. 4-239
Registration roller (metal)
Fig. 4-240
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 84
Washer
Clip