5.11.3
Functions
[A] Check of the File System (Check F/S)
In case that particular service calls occur or there is a possibility of damage to the file system, the status
of each partition in the HDD can be checked.
File System(F/S) Recovery Mode -> Check F/S
Please Select Partition
1. ALL
2. /
3. /work
4. /registration
5. /backup
6. /imagedata
7. /storage
8. /encryption
Explanation for each item
•
1: Checks all partitions.
•
2: Checks root partition only.
•
3-8: Checks each partition shown above.
Notes:
More than one partition can be selected. (">" is displayed on the left of the selected number.)
* If damage is discovered, recover or initialize the file system (HDD).
[B] Recovery of the File System (Recovery F/S)
In case that an error occurs during the file system check, each partition can be recovered.
File System(F/S) Recovery Mode -> Recovery F/S
Please Select Partition
1. ALL
2. /
3. /work
4. /registration
5. /backup
6. /imagedata
7. /storage
8. /encryption
Explanation for each item
•
1: Recovers all partitions.
•
2: Recovers root partition only.
•
3-8: Recovers each partition shown above.
Remarks:
More than one partition can be selected. (">" is displayed on the left of the selected number.)
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
SELF-DIAGNOSIS MODES
0: Main menu
Fig.5-15
0: Main menu
Fig.5-16
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
5 - 22