[F106_3] ADI-HDD error: ADI authentication Admin Password generation error
Classification
Other service call
Check Item
Setting
[F106_4] ADI-HDD error: Authentication random number generation error
Classification
Other service call
Check Item
Setting
[F106_5] ADI-HDD error: Authentication data transmission error
Classification
Other service call
Check Item
Setting
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
ADI-HDD error: The generation of ADI authentication
Admin Password fails.
Reinstall the system ROM data (OS Data).
Reinstall the master data (HD Data).
ADI-HDD error: The generation of a random number for
authentication data fails.
Reinstall the system ROM data (OS Data).
Reinstall the master data (HD Data).
ADI-HDD error: The transmission of authentication data fails.
Reinstall the system ROM data (OS Data).
Reinstall the master data (HD Data).
•
In case this error occurred after returning SRAM data for
SRAM cloning:
Copy the ADI-HDD encryption key from FROM to
SRAM.
(1)
Start the equipment in the 3C mode: [3] + [C] +
[POWER]
(2)
The authentication menu is displayed. Press [OK].
(Not required in the default setting)
(3)
Select "5. Key Backup Restore" and then press the
[START] button.
(4)
Select "6. ADIKey FROM to SRAM" and then press
the [START] button.
(5)
After the restoring of the encryption key has
completed, "Operation Complete" is displayed.
(6)
After the operation has completed, shut down the
equipment by pressing the [POWER] button.
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
8 - 203
Error item
Measure
Error item
Measure
Error item
Measure
ERROR CODE AND TROUBLESHOOTING
8