Toshiba e-STUDIO206L Service Manual page 1101

Sub
05/08 Mode Element
element
05 Adjustmen Printer Feeding Paper aligning
t mode system/Pa amount adjustment
per
transport
05 Adjustmen Printer Feeding Paper aligning
t mode system/Pa amount adjustment
per
transport
e-STUDIO206L/256/306/356/456/506
Item Subitem Code
PFP upper drawer 4117
PFP upper drawer 4117
Sub- Default Acceptable
Details
code value value
0 Thick paper1; Long Refer to 0~63
size contents
1 Thick paper1; Middle Refer to 0~63
size contents
25
RAM Contents
M e-STUDIO206L/256/306:When the value increases by
"1", the aligning amount increases by approx. 0.3 mm.
e-STUDIO356/456/506:When the value increases by
"1", the aligning amount increases by approx. 0.4 mm.
<Paper length>
Long size: 330 mm or longer
Middle size: 220 mm to 329 mm
Short size: 219 mm or shorter
<Default value>
e-STUDIO206L/256/306: 37
e-STUDIO356/456: 20
e-STUDIO506: 12
M e-STUDIO206L/256/306:When the value increases by
"1", the aligning amount increases by approx. 0.3 mm.
e-STUDIO356/456/506:When the value increases by
"1", the aligning amount increases by approx. 0.4 mm.
<Paper length>
Long size: 330 mm or longer
Middle size: 220 mm to 329 mm
Short size: 219 mm or shorter
<Default value>
e-STUDIO206L/256/306: 37
e-STUDIO356/456: 20
e-STUDIO506: 12
Proc Service
edure UI
4 Yes
4 Yes