Paper Exit Unit - Toshiba e-STUDIO206L Service Manual

(6) Disconnect 1 connector and remove 2
screws, and take off the reverse unit.
Notes:
Be sure to perform Step (2) before removing
the reverse unit.
Notes:
When installing the reverse unit, engage the
arm of the offset gate motor at the front of the
reverse unit and the holder of the paper exit
unit.
4.14.2

Paper exit unit

(1) Take off the reverse unit
( P. 4-124 "4.14.1 Reverse unit (only
installed for e-STUDIO356/456/506 / 357/
457/507)")
(2) Disconnect 1 connector and remove 2
screws, and take off the paper exit unit.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-356
Fig. 4-357
Paper exit unit
Fig. 4-358
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 125
Reverse unit
Connector
Arm
Holder
Connector
DISASSEMBLY AND REPLACEMENT
4