Toshiba e-STUDIO206L Service Manual page 159

(3) Release the hook and then take off the
control panel unit [1].
(4) Remove 3 screws and the screw of the
clamp. Take off the cover [2].
Notes:
When installing the cover, set the cable in the
case.
(5) Remove 1 screw and take out the clamp.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
[ 1 ]
Fig. 4-54
Fig. 4-55
Fig. 4-56
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 19
[ 2 ]
DISASSEMBLY AND REPLACEMENT
4