Toshiba e-STUDIO206L Service Manual page 573

Error code Classification
EF10 Finisher jam
(Finisher section)
EF11
EF12
EF13
EF14
EF15
EF16
EF17
EF18
EF19
EF1A
EF1B
EF1C
EF20
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Contents
Paper not supported for Saddle Stitch Finisher:
Unsupported paper size, type and an excess
number of pages for stapling are selected. [MJ-
1106/1108]
Saddle Stitch Finisher stapling error (front): Front
stapling is not correctly done. [MJ-1106/1108]
Saddle Stitch Finisher stapling error (rear): Rear
stapling is not correctly done. [MJ-1106/1108]
Saddle paper holder home position detection
abnormality: The paper holder home position
cannot be detected. [MJ-1106/1108]
Saddle paper exit jam: Outputting paper is not
completed within a fixed time. [MJ-1106/1108]
Saddle Stitch Finisher side alignment motor home
position detection abnormality: The side alignment
motor home position cannot be detected. [MJ-1106/
1108]
Saddle Stitch Finisher stacker motor home position
detection abnormality: The stacker motor home
position cannot be detected. [MJ-1106/1108]
Saddle Stitch Finisher folding blade home position
detection abnormality: The folding blade home
position cannot be detected. [MJ-1106/1108]
Saddle Stitch Finisher additional folding roller home
position detection abnormality: The additional
folding roller home position cannot be detected.
[MJ-1106/1108]
Saddle paper folding jam: Fold processed paper
cannot be transported to the additional folding
roller. [MJ-1106/1108]
The trailing edge of the paper passed the entrance
path sensor on the Finisher unit transport path.
After the switchback, the paper is transported to the
saddle stitch unit transport path, but does not reach
the saddle stitch entrance path sensor.
Paper remains at the saddle stitch positioning
paper exit sensor for a longer period than specified
while being transported in the pushing/folding
operation. [MJ-1033]
Paper is transported in the pushing/folding
operation, but does not reach the saddle stitch exit
path sensor.
Saddle stacker jam: Transported paper cannot be
detected in the stacker. [MJ-1106/1108]
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
8 - 13
Troubleshooting
P. 8-115
P. 8-115
P. 8-116
P. 8-116
P. 8-116
P. 8-117
P. 8-118
P. 8-118
P. 8-119
P. 8-119
-
P. 8-120
P. 8-117
P. 8-120
ERROR CODE AND TROUBLESHOOTING
8