Platen Sensor-1, -2(S21, S22) - Toshiba e-STUDIO206L Service Manual

4.6.9

Platen sensor-1, -2(S21, S22)

(1) Take off the rear cover.
 P. 4-12 "4.2.7 Upper rear cover"
(2) Remove 1 harness clamp [1].Release the
harness from the harness clamp [2].
Disconnect 2 connectors [3]. Remove 4
screws and take off the platen sensor
assembly [4].
(3) Disconnect 2 connectors [1], then take off the
platen sensor-1 [2] and the platen sensor-2
[3].
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-146
Fig. 4-147
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 51
DISASSEMBLY AND REPLACEMENT
4